Faber Grout Cleaner

• Super concentrated alkaline grout cleaning detergent suitable for deep cleaning grout

• It fully removes ingrained organic residue, body fats, soap residue,oils and all limescale

• Safe to use on all kinds of polished and unpolished tiles | Suitable for Wall & floor tiles

• The product reacts with dirt in a matter of minutes and breaks it into small particles

• Suitable for daily maintenance grout cleaning projects and heavy duty grout cleaning

• To be diluted in warm water before use | Dilute 1 part product in about 4 parts water

• The new Faber Grout Cleaner can be used for all kinds of indoor and outdoor projects

• The 500 ML bottle contains enough detergent to clean up to about 20 sq m of grouting

• It can be applied with a spray bottle or a floor scrubber in conjunction with a white pad

• It works much faster than similar products from other brands and is very cost effective

Faber Grout Cleaner | Why Use It

The grout lines are usually made from a mixture of cements and have a much higher porosity than the tiles. The high porosity level will mean the grout lines absorb a lot more residue generated by the daily traffic. The dirt that manages to accumulate inside the grout lines could be deposited in many layers and it could be a very intense cleaning project if the user does not use the right cleaning products. This is the main reason Faber has created the new Faber Grout Cleaner. A burst of energy in a small bottle. The product is highly alkaline, highly active and it will help safely dissolve all types of grout residue. Dirt that otherwise would have been impossible to remove crumbles away in contact with the new Faber Grout Cleaner.

Faber Grout Cleaner | Where To Use It

The new Faber Grout Cleaner is suitable for all kinds of indoor and outdoor grout cleaning projects. It can be used successfully on all vertical and all horizontal surfaces. Safe to use for deep cleaning the grout lines and also the tiles.

Cotto | Terracotta | Ceramic | Porcelain | Marble | Travertine | Terrazzo | Granite | Natural Stones | Cement | Limestone | All Types Of Grout

Faber Grout Cleaner | How To Use

This is a highly alkaline cleaning product and it should be treated as such. The product has a recommended dilution of 1 to 4 but the dilution can be slightly decreased when dealing with very intense grout cleaning projects. To be able to successfully complete the project, the user should prepare a pair of good quality gloves, some scrubbing brushes, scourers and a wet vacuum if dealing with larger floor areas. A floor buffer is highly recommended when deep cleaning large floor areas.

1. Remove as much excess dirt as possible from the grout lines.

2. Apply the new Faber Grout Cleaner generously to the affected area.

3. Allow the product to work for about 5 to 10 minutes.

4. Scrub the area with a grout scrubbing brush, a hand brush or a floor buffer.

5. Rinse off all the excess product and assess the results. If needed, repeat the operation.

Faber Grout Cleaner | Recommendation

Hand protection should be used while handling this grout cleaning product. The dilution should be respected to prevent staining the surface or making the product inefficient. The surface should be rinsed with clean water after the grout cleaning project is completed. Do not mix up the new Faber Grout Cleaner with any other cleaning products to avoid unwanted reactions. Store the product in a dry place away from direct sunlight and out of reach of children. The lid of the bottle is fitted with a special child safe locking system. Fumes free grout cleaner

Faber Grout Cleaner